Review Questions 1. What should you do to ensure your safety before crosscutting with a radial-arm saw?

To ensure your safety before crosscutting with a radial-arm saw, you should:1. Unplug the saw: Always unplug the saw before making any adjustments or changing the blade. This is the most important safety step to prevent accidental activation.2. Check the blade: Ensure that the blade is the correct type and size for the material you are cutting. It should be sharp and properly aligned.3. Measure and mark the material: Measure the material and mark the cutting line clearly. This will help you make a precise cut and avoid accidents.4. Secure the material: Use clamps or other securing methods to hold the material in place. This will prevent it from moving during the cut.5. Wear appropriate protective gear: Depending on the material you are cutting, you may need to wear safety glasses, gloves, or other protective equipment.6. Keep the area clear: Ensure that the area around the saw is clear of any obstacles or materials that could be thrown or caught in the blade.7. Use proper technique: Follow the manufacturer's instructions for operating the saw. Avoid reaching over the blade or making excessive force.By following these steps, you can significantly reduce the risk of accidents and injuries while crosscutting with a radial-arm saw.